| Home | Services | Products |
| Capabilities | Contact | Full Site |
Products
Sensor Junction Box Assembly (#101571875)
The Applied Automation & Controls Sensor Junction box assembly is fully sealed and allows up to four sensors to be bussed in to a single cable.
The assembly contains terminal blocks for each sensor cable. It allows the selection of sensor voltages between 5, 12 and 24V DC for individual sensors. LED indicators are present for each power input voltage. A removable label plate allows easy identification of the sensor connector.
The assembly is fully sealed and is available with a point of load 5V power converter option to reduce the voltage drop on long cable runs.
Both the electrical and mechanical elements of the assembly are fully RoHS compliant.
Optional CE marking & ATEX certification is also available.
Part Number:
00-92690: Sensor Junction Box Assembly with Point of Load (PoL) 5V Power converters
Technical Specifications:
|
Environmental Specifications |
|
Operating Temperature: |
-40C to 85C |
Storage Temperature: |
-55C to 125C |
Thermal Shutdown: |
110C |
Enclosure Rating: |
IP67, NEMA 6 |
|
General Specifications |
|
Dimensions: |
230 x 70 x 50 mm |
Indicators: |
Power Status LED |
PoL Output: |
5V @ 500mA |
Power Input: |
9-28 V @ 250mA |
Titan Mini – IoT Data Acquisition Unit
The Titan Mini IoT data acquisition unit is a self-contained rugged and efficient oilfield data acquisition system specifically designed for well servicing operations. The unit is extremely rugged and designed for harsh environments.
Highlights
The Titan Mini is designed with the latest electronic hardware component technologies and not be in danger from obsolescence for 10 years.
The Titan Mini has been designed to bring IoT capabilities to oilfield sensors and legacy hardware. With a wide operating voltage range and versatile I/O count it allows it to completely instrument small oilfield equipment. Additionally with the high speed Ethernet, WiFi, CAN, USB and Serial ports it can be used to replace boards in the customers system, thus reducing cost and complexity.
The Titan Mini is equipped with 4 high resolution analog inputs, 4 frequency channels, and a high power control output. This enables a single Titan Mini unit to be used for small to medium equipment without requiring any slave boards etc.
Part Number: 00-93711
Technical Specifications:
|
|
Operating Temperature: |
-40C to 70C |
Storage Temperature: |
-40C to 90C |
Enclosure Rating: |
IP67, NEMA 6 |
Relative Humidity: |
To 95% |
|
|
Power Supply: |
9-28VDC, 150mA |
Analog Inputs: |
4 16 bit Analog Inputs configurable as mA, |
Digital/Frequency Input |
4 x up to 50kHz |
Digital Outputs: |
1 x 1A DC |
|
|
CPU Type: |
ARM |
ROM Memory: |
4GB Flash Memory |
RAM Memory: |
512MB DDR3 Memory |
Data Memory: |
Micro SD Card 16GB |
|
|
Serial Ports: |
2 x RS232 |
CAN Ports: |
1 |
Ethernet Ports: |
100BT or 802.11bgn |
Other: |
I2C, SPI, USB |
Display: |
LCD w/ backlight |
Protocols: |
TCPIP, HTTP, FTP |
|
|
Dimensions: |
6.3 x 4.72 x 3.15 inch |
Weight: |
4.25 lbs |
Material: |
Aluminum |
TitanVu
 |
TitanVu is the software application to connect directly to the AAAC DAQ hardware over Ethernet. It can also display, record and playback job data.
AAAC Systems is a provider of efficient monitoring software and hardware systems for oilfield and petrochemical applications. TitanVu is the application for reading data from all of the AAAC DAQs.
Download for free here.
Technical Specifications:
|
|
Current Version: |
1.5.5 |
Requires Android: |
4.4 and up |
Automated Keypad Test System
The Keypad Test System by Applied Automation & Controls is a fully automatic system. The system can be used to automatically test different types of keyboards, such as mechanical, membrane, capacitive, and piezo keypads. The system can test each keypad with multiple actuation pressures and create a detailed diagnostic log of the test results.
Part Number:
00-93360: Automatic Keypad Test System
Technical Specifications:
|
|
Speed: |
100 Keys Per Minute |
Actuation Force: |
0.1-30 ozs |
Dimensions: |
21"L x 13"W x 15"H |
Computer Interface: |
USB |
Power Supply: |
110VAC |
TitanSolar – Solar Charged DC Supply System
The TitanSolar is a solar charge power system for use in locations with unreliable power. The unit is extremely rugged and designed for harsh environments.
Highlights
The TitanSolar is has been specifically design for a long service life without any need for maintenance or battery replacement. The unit can be used as a primary power system for low power applications or a backup power source for high power applications. Long maintenance free operation and high MMTBF is achieved by using high quality monocrystalline solar cells and high pressure long life sealed batteries.
Analog voltage monitoring is standard while digital (SPPI) based voltage monitoring and control is available as an option. Output voltages from 5 to 24 V are available as standard configurations.
Technical Specifications:
|
|
Dimensions: |
70 x 20 x 19 inch |
Operating Temperature: |
-20C to 60C |
Storage Temperature: |
-40C to 90C |
Enclosure Rating: |
IP67, NEMA 6 |
Relative Humidity: |
To 95% |
|
|
Power In: |
9-36VDC, 4600mA or 200W solar panel |
Power Out: |
244VDC, 4170mmA |
Backup Capacity: |
1.22 to 16 Ah |
Battery Specs: |
10+yrs float life @25C avg |
Voltage Monitoring: |
LED Indication |
Part Number: 00-93652
DC to DC Power Supply
Wide Input Power Supplies
The Applied Automation & Control Wide Input Power Supplies are RoHS compliant self-contained modular power module. All modules in this series are RoHS compliant and CE marked.
Other features include spring clamp wire terminals, LEDs for power indication, and surge suppression.
Voltage Output & Power Rating:
| 00-92250 | 5V Output | 50W |
| 0092251 | 12V Output | 50W |
| 00-92252 | 15V Output | 50W |
| 00-92253 | 24V Output | 50W |
| 00-92254 | 48V Output | 50W |
Technical Specifications:
|
|
Operating Temperature: |
-40C to 100C |
Storage Temperature: |
-55C to 125C |
Thermal Shutdown: |
110C |
Enclosure Rating: |
IP67, NEMA 6 |
Relative Humidity: |
To 95% |
|
|
Efficiency: |
91% |
MTBF (MIL-HDBK-217F): |
380kHrs |
Indicators: |
LED x 2 |
Surge Protection: |
Input & Output TVS |
Serialization: |
Each unit Serialized |
Dimensions: |
60 x 58 x 32 mm |
|
|
Input Voltage: |
9-36VDC, 24V Nom |
Current Limit: |
150% of Nominal |
Power Rating: |
50W |
Switch Frequency |
350kHz |
Output Ripple |
< 0.3% pk-pk |
Ruggedized Zigbee Module
The Applied Automation & Controls ruggedized Zigbee modules are compact units in sealed aluminum housings. The module is available in a potted and a conformal coated version. Both version fully sealed and include a Zigbee module, carrier board, power supply and serial port line drivers. The modules have an integral RP-SMA antenna connector. The modules are RoHS compliant. Optional CE marking & ATEX certification is also available.
Model Numbers:
00-92601: Encapsulated housing with polyurethane cable
00-92632: Encapsulated housing with custom length polyurethane cable
Technical Specifications:
|
|
Operating Temperature: |
-40C to 85C |
Storage Temperature: |
-55C to 125C |
Enclosure Rating: |
IP67, NEMA 6 |
Relative Humidity: |
To 95% |
|
|
Dimensions: |
89x39x39mm |
Indicators: |
LED x1 |
Antenna: |
1/2 Wave RP-SMA |
Frequency: |
2.4 Ghz |
Transmission Power: |
60mW |
Voltage: |
10-30VDC |
Current: |
15mA @ 12V recv |
DC UPS
Direct Current Uninterruptable Power Supplies
The Applied Automation & Controls DC-UPS Power Supplies Units are RoHS compliant self-contained modular uninterruptable power supplies. All modules in this series are RoHS compliant and CE marked.
Other features include spring clamp wire terminals, LEDs for power input and backup operation indication.
Technical Specifications:
|
|
Operating Temperature: |
-40C to 70C |
Storage Temperature: |
-40C to 125C |
Thermal Shutdown: |
110C |
Relative Humidity: |
To 95% |
|
|
Efficiency: |
91% |
Surge Protection: |
Input & Output TVS |
Serialization: |
Each unit Serialized |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Numbers & Power Rating:
00-92501 24V Output 100W
Power Derating:
NextGen DAQ
Titan - Next Generation Data Acquisition Unit
-
Titan NextGEN DAQ ATEX Certificate
Hazardous Area Certification for the Titan NextGEN DAQ System
 |
| Titan Standard Unit |
 |
| Front View: Titan NextGen DAQ for service at 5000 psi pressure on the ocean floor. |
 |
| Rear View: Titan NextGen DAQ for service at 5000 psi pressure on the ocean floor. |
The Titan sensor acquisition unit is a self-contained rugged and efficient oilfield data acquisition system specifically designed for well servicing operations. The unit is extremely rugged and designed for harsh environments.
Highlights
The Titan is designed with the latest electronic hardware component technologies and not be in danger from obsolescence for 10 years.
The NexGEN unit has been design to be a drop in replacement for the existing hardware and is protocol compatible with the CAT software. With a wide operating voltage range in increased I/O count it will allow for backwards compatibility while giving new applications increased capabilities. Additionally with the high speed Ethernet, CAN and Serial ports it can be used to replace multiple boards in the customers system, thus reducing cost and complexity.
The NexGEN is equipped with 16 24-bit analog inputs, 8 frequency channels, 4 analog outputs and 8 PWM channels. This enables a single NexGEN unit to be used to acquire data a large amount of data without requiring any slave boards etc.
The unit has been designed for future SIL certification and has the redundancy building blocks already in place.
Technical Specifications:
Environmental Specifications |
|
Operating Temperature: |
-30C to 70C |
Storage Temperature: |
-40C to 90C |
Enclosure Rating: |
IP67, NEMA 6 |
Relative Humidity: |
To 95% |
|
|
Power Supply: |
9-36VDC, 150mA |
Analog Inputs: |
8 x 4-20mA 24bit |
Analog Outputs: |
4 x 4-20mA x 16bit |
Digital/Frequency Input: |
8 x up to 50kHz |
Depth Inputs: |
2 x up to 50kHz |
Digital Outputs: |
6 x 1A DC PWM |
|
|
CPU Type: |
32-bit ColdFire-V4e |
CPU Speed: |
250MHz |
ROM Memory: |
32MB Flash Memory |
RAM Memory: |
64MB DDR2 Memory |
Data Memory: |
Micro SD Card 16GB |
|
|
Serial Ports: |
2 x RS232 |
CAN Ports : |
1 |
Ethernet Ports: |
100BaseT |
Other: |
I2C, SPI, USB |
Display: |
LCD w/ Backlight |
Protocols: |
TCPIP, HTTP, FTP, |
|
|
Dimensions: |
8.0 x 8.0 x 2.75 inch |
Weight: |
6.5 lbs |
Material: |
Aluminum Casting |
Part Number: 00-92401
Density Stick
The Applied Automation & Control density mud stick is a portable battery powered density measuring device. It can measure liquid density’s ranging from 0 to 25 ppg while also measuring the temperature of mud or slurry as well.
Other features include Bluetooth data transfer and USBB port for setup and charging. The Density Stick is fully sealed and utilizes a magnetic reed start up.
Technical Specifications:
|
|
Operating Temperature: |
32°F to 140°F |
Storage Temperature: |
32°F to 140°F |
|
|
Density & Temperature |
ppg / deg F |
Indicators: |
LED x 2 |
Dimensions: |
53.5 in x 2.5 in |
Battery Voltage: |
3.7 volts |
Communications: |
Bluetooth |
HOME | SERVICES | PRODUCTS
CAPABILITIES | CONTACT | FULL SITE
All content copyright © 2013-2015 Applied Automation and Controls, Inc.